欢迎访问ic37.com |
会员登录 免费注册
发布采购

DS-S29804 参数 Datasheet PDF下载

DS-S29804图片预览
型号: DS-S29804
PDF下载: 下载PDF文件 查看货源
内容描述: 的Stratix II EP2S60 DSP开发板 [Stratix II EP2S60 DSP Development Board]
分类和应用:
文件页数/大小: 52 页 / 3819 K
品牌: ALTERA [ ALTERA CORPORATION ]
 浏览型号DS-S29804的Datasheet PDF文件第14页浏览型号DS-S29804的Datasheet PDF文件第15页浏览型号DS-S29804的Datasheet PDF文件第16页浏览型号DS-S29804的Datasheet PDF文件第17页浏览型号DS-S29804的Datasheet PDF文件第19页浏览型号DS-S29804的Datasheet PDF文件第20页浏览型号DS-S29804的Datasheet PDF文件第21页浏览型号DS-S29804的Datasheet PDF文件第22页  
Stratix II EP2S60 DSP Development Board Data Sheet  
Configuration-Status LEDs  
The configuration controller is connected to four status LEDs that show  
the configuration status of the board at a glance. You can tell which  
configuration, if any, was loaded into the FPGA at power-on by looking  
at the LEDs. If a new configuration is downloaded into the Stratix II  
device via the JTAG interface, then the USER LED (LED1) remains  
illuminated. The rest of the configuration-status LEDs turn off if the  
unused pins are configured as inputs, tri-stated for the Stratix II device.  
Table 8 shows the behavior of the configuration-status LEDs.  
Table 8. Configuration Status LED Indicators  
LED LED Name Color  
Description  
LED3  
Loading  
Green  
This LED blinks while the configuration controller is actively transferring  
data from flash memory into the Stratix II FPGA.  
LED4  
LED1  
LED2  
Error  
Red  
If the red Error LED is on, then configuration was not transferred from flash  
memory into the Stratix II device. This can happen if, for example, the flash  
memory contains neither a valid user or factory configuration.  
User  
Green  
Amber  
This LED turns on when the user configuration is being transferred from  
flash memory and stays illuminated when the user configuration data is  
successfully loaded into the Stratix II device.  
Factory  
This LED turns on when the factory configuration is being transferred from  
flash memory and stays illuminated if the factory configuration was  
successfully loaded into the Stratix II device.  
Dual Seven-Segment Display & LEDs  
A dual seven-segment display and two LEDs are provided. The segments  
illuminate if the Stratix II pin to which they are connected drives low.  
They appear unlit when the connected Stratix II device pin drives high.  
The LEDs illuminate if the connected Stratix II device pin drives high, and  
are unlit when the connected Stratix II device pin drives low.  
Table 9 shows the pin-outs for the seven-segment display and LEDs.  
Table 9. Seven-Segment Display & LED Pin-Outs (Part 1 of 2)  
Signal  
Stratix II Pin  
Dual Seven-Segment Display  
HEX_0A  
HEX_0B  
HEX_0C  
C4  
C5  
B5  
18  
Preliminary  
Altera Corporation  
 复制成功!