ADDR1600C4G11
DDR3L-1600(CL11) 240-Pin R-DIMM
4GB(512M x 72-bits)
Input DC & AC Logic Level for single-ended signals：
Parameter
Symbol
Min
Max
Unit
Note
DC Input logic high voltage
DC Input logic low voltage
AC input logic high
VIH (DC)
VIL (DC)
VIH(AC)
VIL(AC)
VREF+100
VDD
VREF-100
-
mV
mV
mV
mV
1
VSS
1
VREF + 175
-
1,2
1,2
AC input logic low
VREF – 175
Note: 1. For DQ and DM, VREF = VREFDQ . For input only pins except RESET, or VREF = VREFCA.
2. See "Overshoot and Undershoot specifications" on component datasheet
Input AC Logic Level for single-ended signals：
Parameter
Symbol
Min
Max
Unit
Note
Differential input high
Differential input low
VIHdiff
VILdiff
+0.2
Note 3
Note 3
-0.2
V
V
V
V
1
1
2
2
Differential input high AC
Differential input low AC
VIHdiff(AC)
VILdiff (AC)
2 (VIH(ac)-Vref)
Note 3
Note 3
2 x (Vref - VIL(ac))
Notes: 1. Used to define a differential signal slew-rate.
2. For CK - CK use VIH/VIL(ac) of ADD/CMD and VREFCA; for DQS - DQS, DQSL - DQSL, DQSU - DQSU use VIH/VIL(ac) of DQs
and VREFDQ; if a reduced ac-high or ac-low level is used for a signal group, then the reduced level applies also here.
3. These values are not defined, however they single-ended signals CK, /CK, DQS, /DQS, DQSL, /DQSL, DQSU, /DQSU need to be
within the respective limits (VIH(dc) max, VIL(dc)min) for single-ended signals as well as the limitations for overshoot and undershoot
on Component Datasheet.
11
ADATA [ ADATA Technology Co., Ltd. ]
