PACE1750AE
1
ABSOLUTE MAXIMUM RATINGS
Supply Voltage Range
-0.5V to 7.0V
-0.5V to V + 0.5V
Thermal resistance, junction-to-case (Θ ), Note 5:
JC
Cases X and T
Cases Y and U
Case Z
8°C/W
5°C/W
6°C/W
Input Voltage Range
CC
Storage Temperature Range -65°C to + 150°C
Input Current Range
-30mA to +5mA
-0.5V to VCC + 0.5V
Voltage Applied to Inputs
Current Applied to Outputs
RECOMMENDED OPERATING
CONDITIONS
3
150 mA
Supply Voltage Range
4.5V to 5.5V
2
Maximum Power Dissipation 1.5W
Case Operating Temperature -55°C to +125°C
Range
Operating worst case power dissipation (outputs
open), Note 4:
Device type 05 (20 MHz)
Device type 06 (30 MHz)
Device type 07 (40 MHz)
0.4W at 20 MHz
0.5W at 30 MHz
0.6W at 40 MHz
Lead Temperature Range
(soldering 10 seconds)
300° C
NOTE 1:
Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the maximum levels may
degrade performance and affect reliability.
NOTE 2:
Must withstand the added power dissipation due to short circuit test e.g., I
OS
NOTE 3:
Duration one second or less.
NOTE 4: Device Type Definitions from 5962-87665 SMD:
Device Type 05: 20 MHz
Device Type 06: 30 MHz
Device Type 07: 40 MHz
NOTE 5: Case Definitions from 5962-87665 SMD:
Case X: Dual In-Line
Case T: Dual In-Line with Gull-Wing Leads
Case Y: Leaded Chip Carrier with Gull-Wing Leads
Case U: Leaded Chip Carrier with Unformed Leads
Case Z: Pin Grid Array
Do c um e nt # MICRO-2 REV G
Pa g e 3 o f 25
PYRAMID [ PYRAMID SEMICONDUCTOR CORPORATION ]
