1-2 Motor Driver ICs
Application Note
■ Setup Precautions
■ Handling Precautions
●Recommended mounting torque
When using the following products that use C-MOS circuits for input
terminals, observe the following.
0.588 to 0.784 [N•m](6.0 to 8.0 [kgf•cm])
●Recommended silicone grease
SMA7036M/SLA7031M/SLA7032M/SLA7033M
SLA7050M/SLA7051M/SLA7052M
Shin-Etsu Chemical Co., Ltd.: G746
Momentive Performance Materials Inc.: YG-6260
Dow Corning Toray Silicone Co., Ltd.: SC102
Please select proper silicone grease carefully since the oil in some
grease products may penetrate the device and result in an extremely
short device life.
SLA7060M/SLA7061M/SLA7062M
SLA7065M/SLA7066M/SLA7067M
SLA7070MR/SLA7071MR/SLA7072MR/SLA7073MR
SLA7070MPR/SLA7071MPR/SLA7072MPR/SLA7073MPR
SLA7075MR/SLA7076MR/SLA7077MR/SLA7078MR
SLA7075MPR/SLA7076MPR/SLA7077MPR/SLA7078MPR
SLA7080MPR/SLA7081MPR/SLA7082MPR/SLA7083MPR
STA6940M
SPI-6631M
SX68000M Series
SMA6800M Series
SLA6800M Series
SCM1100M Series
SCM1200M Series
●Carefully control the humidity of the room to prevent the buildup of static
electricity. Since static electricity is particularly a problem during the
winter, be sure to take sufficient precautions.
Take care to make sure that static electricity is not applied to the IC
during wiring and assembly. Take precautions such as shorting the
terminals of the printed circuit board to ensure that they are at the same
electrical potential.
ICs
89
ETC [ ETC ]
