Freescale Semiconductor, Inc.
System Setup
Building the Application
1
®2
• Metrowerks CodeWarrior for MC68HC08 microcontrollers
version 1.2 or later.
• PC master software version 1.2.0.11 or later
5.6 Building the Application
To build this application, open the 3ph_acim_dt_correct.mcp project
file and execute the Make command; see Figure 5-3. This command will
build and link the motor control application along with all needed
Metrowerks libraries.
Figure 5-3. Execute Make Command
5.7 Executing the Application
To execute the motor control application, in the pull-down menu choose
®
the Project/Debug command in the CodeWarrior IDE, followed by the
Run command.
1. Metrowerks® and the Metrowerks logo are registered trademarks of Metrowerks, Inc., a wholly
owned subsidiary of Motorola, Inc.
2. CodeWarrior® is a registered trademark of Metrowerks, Inc., a wholly owned subsidiary of
Motorola, Inc.
DRM019 — Rev 0
MOTOROLA
Designer Reference Manual
System Setup
53
For More Information On This Product,
Go to: www.freescale.com
ETC [ ETC ]
