Bit 2: Compare match flag L (CMFL)
Bit 2 is a status flag indicating that TCFL has matched OCRFL. This flag is set by hardware and
cleared by software. It cannot be set by software.
Bit 2
CMFL
Description
0
Clearing conditions:
(initial value)
After reading CMFL = 1, cleared by writing 0 to CMFL
1
Setting conditions:
Set when the TCFL value matches the OCRFL value
Bit 1: Timer overflow interrupt enable L (OVIEL)
Bit 1 selects enabling or disabling of interrupt generation when TCFL overflows.
Bit 1
OVIEL
Description
0
1
TCFL overflow interrupt request is disabled
TCFL overflow interrupt request is enabled
(initial value)
Bit 0: Counter clear L (CCLRL)
Bit 0 selects whether TCFL is cleared when TCFL and OCRFL match.
Bit 0
CCLRL
Description
0
1
TCFL clearing by compare match is disabled
TCFL clearing by compare match is enabled
(initial value)
5. Clock stop register 1 (CKSTPR1)
7
6
5
4
3
2
1
0
Bit:
S1CKSTP S31CKSTP S32CKSTP ADCKSTP TGCKSTP TFCKSTP TCCKSTP TACKSTP
1
1
1
1
1
1
1
Initial value:
Read/Write:
1
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
CKSTPR1 is an 8-bit read/write register that performs module standby mode control for peripheral
modules. Only the bit relating to timer F is described here. For details of the other bits, see the
sections on the relevant modules.
206
ETC [ ETC ]
