欢迎访问ic37.com |
会员登录 免费注册
发布采购

Z8FMC04100QKSG 参数 Datasheet PDF下载

Z8FMC04100QKSG图片预览
型号: Z8FMC04100QKSG
PDF下载: 下载PDF文件 查看货源
内容描述: Z8喝采-R电机控制闪存MCU [Z8 Encore-R Motor Control Flash MCUs]
分类和应用: 闪存微控制器和处理器外围集成电路电机时钟
文件页数/大小: 402 页 / 4558 K
品牌: ZILOG [ ZILOG, INC. ]
 浏览型号Z8FMC04100QKSG的Datasheet PDF文件第269页浏览型号Z8FMC04100QKSG的Datasheet PDF文件第270页浏览型号Z8FMC04100QKSG的Datasheet PDF文件第271页浏览型号Z8FMC04100QKSG的Datasheet PDF文件第272页浏览型号Z8FMC04100QKSG的Datasheet PDF文件第274页浏览型号Z8FMC04100QKSG的Datasheet PDF文件第275页浏览型号Z8FMC04100QKSG的Datasheet PDF文件第276页浏览型号Z8FMC04100QKSG的Datasheet PDF文件第277页  
Z8FMC16100 Series Flash MCU  
Product Specification  
251  
Read Program Memory. The Read Program Memory command reads data from Program  
Memory. This command is equivalent to the LDC and LDCI instructions. Data can be read  
1–65536 bytes at a time (65536 bytes can be read by setting size to 0). If the device is not  
in DEBUG mode or if the Read Protect option bit is enabled, this command returns FFh  
for the data.  
DBG 0Bh  
DBG Program Memory Address[15:8]  
DBG Program Memory Address[7:0]  
DBG Size[15:8]  
DBG Size[7:0]  
DBG 1-65536 data bytes  
Write Data Memory. The Write Data Memory command writes data to Data Memory.  
This command is equivalent to the LDE and LDEI instructions. Data can be written 1–  
65536 bytes at a time (65536 bytes can be written by setting size to 0). If the device is not  
in DEBUG mode or if the Read Protect option bit is enabled, the data is discarded.  
DBG 0Ch  
DBG Data Memory Address[15:8]  
DBG Data Memory Address[7:0]  
DBG Size[15:8]  
DBG Size[7:0]  
DBG 1-65536 data bytes  
Read Data Memory. The Read Data Memory command reads from Data Memory. This  
command is equivalent to the LDE and LDEI instructions. Data can be read 1–65536  
bytes at a time (65536 bytes can be read by setting size to 0). If the device is not in  
DEBUG mode, this command returns FFhfor the data.  
DBG 0Dh  
DBG Data Memory Address[15:8]  
DBG Data Memory Address[7:0]  
DBG Size[15:8]  
DBG Size[7:0]  
DBG 1-65536 data bytes  
Read Program Memory CRC. The Read Program Memory CRC command computes and  
returns the CRC (cyclic redundancy check) of Program Memory using the 16-bit CRC-  
CCITT polynomial (x16 + x12 + x5 + 1). The CRC is preset to all 1s. The least-significant  
bit of the data is shifted through the polynomial first. The CRC is inverted when it is trans-  
mitted. If the device is not in DEBUG mode, this command returns FFFFhfor the CRC  
value. Unlike most other OCD Read commands, there is a delay from issuing of the com-  
mand until the OCD returns the data. The OCD reads the Program Memory, calculates the  
PS024604-1005  
P R E L I M I N A R Y  
On-Chip Debugger Commands  
 复制成功!