Le77D11
Data Sheet
Specification
Condition
Min
Typ
Max
Unit
Note
IMT Pin Characteristics
Output impedance
Offset current, RL = open,
IMT = VREF
1
MΩ
3.
–5
+5
V
IMTi
Output Range
Ringing
–180
–110
–80
+180
+110
+80
µA
V
3.
4.
Active and Reverse Polarity
Standby and Line Test
VIN = 0.7V, RL = 100 Ω with respect
to VREF
Line Test |IMT| current limit
80
120
V
IMT Thermal Shutdown
IIMT = 1mA
2.8
Notes:
1. AB = Voltage between the Ai (Tip) and Bi (Ring) pins.
V
2. Overload level is defined when THD = 1%.
3. Guaranteed by design.
4. Not tested in production. Parameter is guaranteed by characterization or correlation to other tests.
5. Layout should have less than 10 pF from pin to ground.
6. IIMT = current coming out from IMT pin.
7. When On Hook, RLDC is open circuit, RLAC = 600 Ω.
8. C3 and C2 have pull-downs and C1 has pull-up to set the device state to Disconnect when the pins are floating.
17
Zarlink Semiconductor Inc.