QPro Virtex 2.5V Radiation-Hardened FPGAs
Virtex FPGA DC Characteristics
Absolute Maximum Ratings
Table 3:
Absolute Maximum Ratings
Symbol
V
CCINT
V
CCO
V
REF
V
IN(3)
V
TS
V
CC
T
STG
T
J
Notes:
1.
Stresses beyond those listed under Absolute Maximum Ratings might cause permanent damage to the device. These are stress ratings only,
and functional operation of the device at these or any other conditions beyond those listed under Operating Conditions is not implied.
Exposure to Absolute Maximum Ratings conditions for extended periods of time might affect device reliability.
Power supplies can turn on in any order.
For protracted periods (e.g., longer than a day), V
IN
should not exceed V
CCO
by more that 3.6V.
Description
Supply voltage relative to GND
Supply voltage relative to GND
Input reference voltage
Input voltage relative to GND
Using V
REF
Internal threshold
Voltage applied to 3-state output
Longest supply voltage rise time from 1V to 2.375V
Storage temperature (ambient)
Junction temperature
Min/Max
–0.5 to 3.0
–0.5 to 4.0
–0.5 to 3.6
–0.5 to 3.6
–0.5 to 5.5
–0.5 to 5.5
50
–65 to +150
+150
Units
V
V
V
V
V
V
ms
C
C
2.
3.
Recommended Operating Conditions
Table 4:
Recommended Operating Conditions
Symbol
V
CCINT
V
CCO
T
IN
T
IC
Description
Supply voltage relative to GND
Supply voltage relative to GND
Input signal transition time
Initialization temperature range
Device
Min
2.5 – 5%
1.2
–
Max
2.5 + 5%
3.6
250
+125
+125
+125
+125
+125
+125
150
200
200
4.0
4.0
4.0
Units
V
V
ns
C
C
C
C
C
C
mA
mA
mA
mA
mA
mA
XQVR300
XQVR600
XQVR1000
–55
–55
–40
–55
–55
–55
–
–
–
–
–
–
T
OC
Operational temperature range
XQVR300
XQVR600
XQVR1000
ICC
INTQ
Quiescent V
CCINT
supply current
XQVR300
XQVR600
XQVR1000
ICC
CCOQ
Quiescent V
CCO
supply current
XQVR300
XQVR600
XQVR1000
Notes:
1.
2.
3.
4.
5.
Correct operation is guaranteed with a minimum V
CCINT
of 2.25V (Nominal V
CCINT
– 10%). Below the minimum value stated above, all delay
parameters increase by 3% for each 50 mV reduction in V
CCINT
below the specified range.
At junction temperatures above those listed as Operating Conditions, all delay parameters increase by 0.35% per
C.
Input and output measurement threshold is ~50% of V
CC
.
Initialization occurs from the moment of V
CC
ramp-up to the rising transition of the INIT pin.
The device is operational after the INIT pin has transitioned High.
DS028 (v2.1) November 5, 2010
Product Specification
3