W83627HF/ F/ HG/ G
CRF3 (SUSLED mode register. Default 0x00)
BIT
DESCRIPTION
Select Suspend LED mode.(VSB powered)
7-6
00: Suspend LED pin is drived low.
01: Suspend LED pin is tri-stated.
10: Suspend LED pin is a 1Hz toggle pulse with 50 duty cycle.
11: Suspend LED pin is a 1/4Hz toggle pulse with 50 duty cycle.
Reserved.
5 - 0
9.12 Logical Device A (ACPI)
CR30 (Default 0x00)
BIT
DESCRIPTION
7 - 1
0
Reserved.
Logic device activation control
1: Active
0: Inactive
CR70 (Default 0x00)
BIT
DESCRIPTION
7 - 4
3 - 0
Reserved.
These bits select IRQ resources for PME .
CRE0 (Default 0x00)
BIT
DESCRIPTION
7
6
5
4
DIS-PANSW_IN. Disable panel switch input to turn system power supply on.
0: PANSW_IN is wire-ANDed and connected to PANSW_OUT.
1: PANSW_IN is blocked and can not affect PANSW_OUT.
ENKBWAKEUP. Enable Keyboard to wake-up system via PANSW_OUT.
0: Disable Keyboard wake-up function.
1: Enable Keyboard wake-up function.
ENMSWAKEUP. Enable Mouse to wake-up system via PANSW_OUT.
0: Disable Mouse wake-up function.
1: Enable Mouse wake-up function.
MSRKEY. Select Mouse Left/Right Botton to wake-up system via PANSW_OUT.
0: Select click on Mouse Left-botton to wake the system up.
1: Select click on Mouse right-botton to wake the system up.
Publication Release Date: June 09, 2006
- 101 -
Revision 2.27