Multilayer Ceramic Capacitors
Standard
Approval Sheet
No.
Item
Test Condition
Requirements
* No remarkable damage or removal of the
Method
15. Adhesive
IEC
Strength of 60384-21/22 * Capacitors mounted on a substrate. A force of 10N terminations.
Termination 4.15 applied perpendicular to the place of substrate
IEC 60384-1 and parallel the line joining the center of
4.13 terminations for 10±1 sec.
16. Vibration
IEC 60384-1 * Reflow solder the capacitors on P. C. Board before * No remarkable damage.
4.17
test.
* Cap. change and Q/D.F. : To meet initial spec.
* Vibration frequency : 10~55 Hz/min.
* Total amplitude : 1.5mm.
* Repeat the conditions for 2 hours each in 3
perpendicular directions.
17. Impulse
Voltage
IEC
60384-14
4.13
* X2 : 2.5KV.
.
* Number of impulse : 24 max.
* There shall be no permanent breakdown or
flashover.
Page 8 of 11
ASC Safety Certified X2_(S3)_011Y_AS
May. 2019
WALSIN [ Walsin Technology ]
