VSC7984
Datasheet
Operating Conditions
The following table shows the recommended operating conditions for the VSC7984 device.
Table 3. Recommended Operating Conditions
Symbol
VCC
VEE
Parameter
Minimum
Typical
5.0
Maximum
Unit
V
Condition
VEE = GND
VCC = GND
Power supply voltage for positive supply operation
Power supply voltage for negative supply operation
Operating temperature(1)
–5.2
V
T
–20
95
°C
1. Lower limit of specification is ambient temperature, and upper limit is case temperature.
Stress Ratings
Stresses listed in the following table may be applied to devices one at a time without causing permanent damage.
Functionality at or exceeding the values listed is not implied. Exposure to these values for extended periods may
affect device reliability.
Table 4. Stress Ratings
Symbol
Parameter
Minimum
Maximum
6
Unit
V
VCC – VEE Power supply voltage
0
IEE
Supply current
500
mA
V
VIN, VCLK Input voltage
VCC – 2
VCC + 1
VCC – 4
VCC
VOUT
VMOD
VOFS
VPW
TS
Output voltage
V
Output voltage modulation control voltage
Output voltage offset control voltage
Pulse width control voltage
VEE – 0.5
VEE – 0.5
VEE
V
VCC
V
VCC
V
Storage temperature
–55
140
°C
V
VESD
Electrostatic discharge voltage, human body model
–250
250
ELECTROSTATIC DISCHARGE
This device can be damaged by ESD. Vitesse recommends that all integrated circuits
be handled with appropriate precautions. Failure to observe proper handling and
installation procedures may adversely affect reliability of the device.
10 of 16
VMDS-10029 Revision 4.1
January 19, 2007
VITESSE [ VITESSE SEMICONDUCTOR CORPORATION ]
