TMC8462 Datasheet • Document Revision V1.4 • 2018-May -09
31 / 204
5.4 External Circuitry and Applications Examples
5.4.1 Device Reset
The NRESET signal should at least be connected to VCCIO via a 10K resistor and to GND via a 10nF capacitor
if no other controlled reset source for proper power-on behavior and reset is used.
VCCIO (3.3V)
TMC8462
10kΩ
NRESET
10nF
Figure 18: Minimum external circuit for power-on reset
5.4.2 Supply Filtering for PLL Supply
The internal PLL is supplied with the same 3.3V as used for VCCIO. An R/L/C filter structure as shown in the
circuit diagram is used. PLLCLK_GND is connected to common ground.
VCCIO (3.3V)
VCCIO (3.3V)
TMC8462
TSTCLK_SELECT
PLLCLK_VCCIO
600 Ω @100MHz
1 Ω
100nF
PLLCLK_GND
Figure 19: PLL supply filter
©2018 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at www.trinamic.com