TMS320F28335, TMS320F28334, TMS320F28332
TMS320F28235, TMS320F28234, TMS320F28232
www.ti.com
SPRS439I–JUNE 2007–REVISED MARCH 2011
Table 6-32. SPI Master Mode External Timing (Clock Phase = 0)(1) (2) (3) (4) (5)
SPI WHEN (SPIBRR + 1) IS EVEN OR
SPIBRR = 0 OR 2
SPI WHEN (SPIBRR + 1) IS ODD
AND SPIBRR > 3
NO.
UNIT
MIN
4tc(LCO)
MAX
MIN
MAX
1
2
tc(SPC)M
Cycle time, SPICLK
128tc(LCO)
5tc(LCO)
127tc(LCO)
ns
ns
tw(SPCH)M
Pulse duration, SPICLK high
(clock polarity = 0)
0.5tc(SPC)M – 10
0.5tc(SPC)M 0.5tc(SPC)M – 0.5tc(LCO) – 10
0.5tc(SPC)M – 0.5tc(LCO)
0.5tc(SPC)M – 0.5tc(LCO)
0.5tc(SPC)M + 0.5tc(LCO)
0.5tc(SPC)M + 0.5tc(LCO)
10
tw(SPCL)M
Pulse duration, SPICLK low
(clock polarity = 1)
0.5tc(SPC)M – 10
0.5tc(SPC)M – 10
0.5tc(SPC)M – 10
0.5tc(SPC)M 0.5tc(SPC)M – 0.5tc(LCO) – 10
3
4
5
8
9
tw(SPCL)M
Pulse duration, SPICLK low
(clock polarity = 0)
0.5tc(SPC)M 0.5tc(SPC)M + 0.5tc(LCO) – 10
ns
ns
ns
ns
ns
tw(SPCH)M
Pulse duration, SPICLK high
(clock polarity = 1)
0.5tc(SPC)M 0.5tc(SPC)M + 0.5tc(LCO) – 10
td(SPCH-SIMO)M
td(SPCL-SIMO)M
tv(SPCL-SIMO)M
tv(SPCH-SIMO)M
tsu(SOMI-SPCL)M
tsu(SOMI-SPCH)M
tv(SPCL-SOMI)M
tv(SPCH-SOMI)M
Delay time, SPICLK high to SPISIMO
valid (clock polarity = 0)
10
Delay time, SPICLK low to SPISIMO
valid (clock polarity = 1)
10
10
Valid time, SPISIMO data valid after
SPICLK low (clock polarity = 0)
0.5tc(SPC)M – 10
0.5tc(SPC)M – 10
35
0.5tc(SPC)M + 0.5tc(LCO) – 10
0.5tc(SPC)M + 0.5tc(LCO) – 10
35
Valid time, SPISIMO data valid after
SPICLK high (clock polarity = 1)
Setup time, SPISOMI before SPICLK
low (clock polarity = 0)
Setup time, SPISOMI before SPICLK
high (clock polarity = 1)
35
35
Valid time, SPISOMI data valid after
SPICLK low (clock polarity = 0)
0.25tc(SPC)M – 10
0.25tc(SPC)M – 10
0.5tc(SPC)M – 0.5tc(LCO) – 10
0.5tc(SPC)M – 0.5tc(LCO) – 10
Valid time, SPISOMI data valid after
SPICLK high (clock polarity = 1)
(1) The MASTER / SLAVE bit (SPICTL.2) is set and the CLOCK PHASE bit (SPICTL.3) is cleared.
(2) tc(SPC) = SPI clock cycle time = LSPCLK/4 or LSPCLK/(SPIBRR +1)
(3) tc(LCO) = LSPCLK cycle time
(4) Internal clock prescalers must be adjusted such that the SPI clock speed is limited to the following SPI clock rate:
Master mode transmit 25-MHz MAX, master mode receive 12.5-MHz MAX
Slave mode transmit 12.5-MHz MAX, slave mode receive 12.5-MHz MAX.
(5) The active edge of the SPICLK signal referenced is controlled by the clock polarity bit (SPICCR.6).
Copyright © 2007–2011, Texas Instruments Incorporated
Electrical Specifications
143
Submit Documentation Feedback
Product Folder Link(s): TMS320F28335 TMS320F28334 TMS320F28332 TMS320F28235 TMS320F28234
TMS320F28232
TI [ TEXAS INSTRUMENTS ]
