TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, UCD9501
TMS320C2802, TMS320C2801, and TMS320F2801x DSPs
www.ti.com
SPRS230H–OCTOBER 2003–REVISED JUNE 2006
1
SPICLK
(clock polarity = 0)
2
4
3
SPICLK
(clock polarity = 1)
5
SPISIMO
SPISOMI
Master Out Data Is Valid
8
9
Master In Data
Must Be Valid
(A)
SPISTE
A. In the master mode, SPISTE goes active 0.5tc(SPC) (minimum) before valid SPI clock edge. On the trailing end of the
word, the SPISTE will go inactive 0.5tc(SPC) after the receiving edge (SPICLK) of the last data bit, except that SPISTE
stays active between back-to-back transmit words in both FIFO and nonFIFO modes.
Figure 6-17. SPI Master Mode External Timing (Clock Phase = 0)
Electrical Specifications
113