MSP430F663x
www.ti.com
SLAS566C –JUNE 2010–REVISED AUGUST 2012
PMM, Brown-Out Reset (BOR)
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
| dDVCC/dt | < 3 V/s
| dDVCC/dt | < 3 V/s
MIN
TYP
MAX UNIT
BORH on voltage,
DVCC falling level
V(DVCC_BOR_IT–)
V(DVCC_BOR_IT+)
1.45
V
BORH off voltage,
DVCC rising level
0.80
60
1.30
1.50
250
V
V(DVCC_BOR_hys) BORH hysteresis
Pulse length required at
mV
tRESET
RST/NMI pin to accept a
reset
2
µs
PMM, Core Voltage
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX UNIT
Core voltage, active
mode, PMMCOREV = 3
VCORE3(AM)
VCORE2(AM)
VCORE1(AM)
VCORE0(AM)
VCORE3(LPM)
VCORE2(LPM)
VCORE1(LPM)
VCORE0(LPM)
2.4 V ≤ DVCC ≤ 3.6 V, 0 mA ≤ I(VCORE) ≤ 21 mA
1.90
V
Core voltage, active
mode, PMMCOREV = 2
2.2 V ≤ DVCC ≤ 3.6 V, 0 mA ≤ I(VCORE) ≤ 21 mA
2 V ≤ DVCC ≤ 3.6 V, 0 mA ≤ I(VCORE) ≤ 17 mA
1.8 V ≤ DVCC ≤ 3.6 V, 0 mA ≤ I(VCORE) ≤ 13 mA
2.4 V ≤ DVCC ≤ 3.6 V, 0 µA ≤ I(VCORE) ≤ 30 µA
2.2 V ≤ DVCC ≤ 3.6 V, 0 µA ≤ I(VCORE) ≤ 30 µA
2 V ≤ DVCC ≤ 3.6 V, 0 µA ≤ I(VCORE) ≤ 30 µA
1.8 V ≤ DVCC ≤ 3.6 V, 0 µA ≤ I(VCORE) ≤ 30 µA
1.80
1.60
1.40
1.94
1.84
1.64
1.44
V
V
V
V
V
V
V
Core voltage, active
mode, PMMCOREV = 1
Core voltage, active
mode, PMMCOREV = 0
Core voltage, low-current
mode, PMMCOREV = 3
Core voltage, low-current
mode, PMMCOREV = 2
Core voltage, low-current
mode, PMMCOREV = 1
Core voltage, low-current
mode, PMMCOREV = 0
PMM, SVS High Side
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
SVSHE = 0, DVCC = 3.6 V
MIN
TYP
0
MAX UNIT
nA
nA
I(SVSH)
SVS current consumption
SVSHE = 1, DVCC = 3.6 V, SVSHFP = 0
SVSHE = 1, DVCC = 3.6 V, SVSHFP = 1
SVSHE = 1, SVSHRVL = 0
200
2.0
µA
1.59
1.79
1.98
2.10
1.62
1.88
2.07
2.20
2.32
2.56
2.85
2.85
1.64
1.84
2.04
2.16
1.74
1.94
2.14
2.26
2.40
2.70
3.00
3.00
1.69
SVSHE = 1, SVSHRVL = 1
1.91
V
V(SVSH_IT–)
SVSH on voltage level(1)
SVSHE = 1, SVSHRVL = 2
2.11
SVSHE = 1, SVSHRVL = 3
2.23
1.81
2.01
2.21
SVSHE = 1, SVSMHRRL = 0
SVSHE = 1, SVSMHRRL = 1
SVSHE = 1, SVSMHRRL = 2
SVSHE = 1, SVSMHRRL = 3
SVSHE = 1, SVSMHRRL = 4
SVSHE = 1, SVSMHRRL = 5
SVSHE = 1, SVSMHRRL = 6
SVSHE = 1, SVSMHRRL = 7
2.33
V
V(SVSH_IT+)
SVSH off voltage level(1)
2.48
2.84
3.15
3.15
(1) The SVSH settings available depend on the VCORE (PMMCOREVx) setting. See the Power Management Module and Supply Voltage
Supervisor chapter in the MSP430x5xx and MSP430x6xx Family User's Guide (SLAU208) on recommended settings and usage.
Copyright © 2010–2012, Texas Instruments Incorporated
59
TI [ TEXAS INSTRUMENTS ]
