CC2640R2L
ZHCSRK4A –APRIL 2020 –REVISED SEPTEMBER 2020
www.ti.com.cn
Measured on the TI CC2650EM-5XD reference design with Tc = 25°C, VDDS = 3.0 V, fRF = 2440 MHz, unless otherwise
noted.
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX UNIT
Wanted signal at –72 dBm, modulated interferer at
Selectivity, ±3 MHz (1)
44 / 41(2)
dB
±3 MHz, BER = 10–3
Wanted signal at –72 dBm, modulated interferer at
Selectivity, ±4 MHz (1)
Selectivity, ±6 MHz (1)
44 / 44(2)
44 / 44(2)
44 / 44(2)
31
dB
dB
dB
dB
±4 MHz, BER = 10–3
Wanted signal at –72 dBm, modulated interferer at
±6 MHz, BER = 10–3
Alternate channel rejection,
±7 MHz(1)
Wanted signal at –72 dBm, modulated interferer at
≥±7 MHz, BER = 10–3
Wanted signal at –72 dBm, modulated interferer at
Selectivity, image frequency(1)
image frequency, BER = 10–3
Note that Image frequency + 1 MHz is the Co-channel
–1 MHz. Wanted signal at –72 dBm, modulated
interferer at ±1 MHz from image frequency, BER =
10–3
Selectivity, image frequency
±1 MHz(1)
5 / 41(2)
dB
Blocker rejection, ±8 MHz and
above(1)
Wanted signal at –72 dBm, modulated interferer at
44
dB
±8 MHz and above, BER = 10–3
Out-of-band blocking (3)
Out-of-band blocking
Out-of-band blocking
30 MHz to 2000 MHz
2003 MHz to 2399 MHz
2484 MHz to 2997 MHz
dBm
dBm
dBm
–35
–19
–19
Wanted signal at 2402 MHz, –69 dBm. Two
interferers at 2405 and 2408 MHz respectively, at the
given power level
Intermodulation
dBm
–37
(1) Numbers given as I/C dB.
(2) X / Y, where X is +N MHz and Y is –N MHz.
(3) Excluding one exception at Fwanted / 2, per Bluetooth Specification.
8.9 500-kbps Coded (Bluetooth 5) –TX
Measured on the TI CC2650EM-5XD reference design with Tc = 25°C, VDDS = 3.0 V, fRF = 2440 MHz, unless otherwise
noted.
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX UNIT
Differential mode, delivered to a single-ended 50-Ωload
through a balun
Output power, highest setting
5
dBm
Measured on CC2650EM-4XS, delivered to a single-ended
50-Ωload
Output power, highest setting
Output power, lowest setting
2
dBm
dBm
dBm
dBm
dBm
dBm
Delivered to a single-ended 50-Ωload through a balun
f < 1 GHz, outside restricted bands
f < 1 GHz, restricted bands ETSI
–21
–43
–65
–71
–46
Spurious emission conducted
measurement(1)
f < 1 GHz, restricted bands FCC
f > 1 GHz, including harmonics
(1) Suitable for systems targeting compliance with worldwide radio-frequency regulations ETSI EN 300 328 and EN 300 440 Class 2
(Europe), FCC CFR47 Part 15 (US), and ARIB STD-T66 (Japan).
Copyright © 2023 Texas Instruments Incorporated
Submit Document Feedback
15
TI [ TEXAS INSTRUMENTS ]
