73S8010R
Low Cost Smart Card Interface
DATA SHEET
ELECTRICAL SPECIFICATION
ABSOLUTE MAXIMUM RATINGS
Operation outside these rating limits may cause permanent damage to the device.
PARAMETER
RATING
Supply Voltage VDD
Supply Voltage VPC
Input Voltage for Digital Inputs
Storage Temperature
-0.5 to 6.0 VDC
-0.5 to 6.0 VDC
-0.3 to (VDD +0.5) VDC
-60 to 150°C
Pin Voltage (except card interface)
Pin Voltage (card interface)
ESD Tolerance – Card interface pins
-0.3 to (VDD +0.5) VDC
-0.3 to (VCC + 0.5) VDC
+/- 6kV
ESD Tolerance – Other pins
+/- 2kV
Note: ESD testing on smart card pins is HBM condition, 3 pulses, each polarity referenced to ground.
RECOMMENDED OPERATING CONDITIONS
PARAMETER
RATING
Supply Voltage VDD
2.7 to 5.5 VDC
4.75 to 5.5 VDC
-40°C to +85°C
0V to VDD + 0.3V
Supply Voltage VPC
Ambient Operating Temperature
Input Voltage for Digital Inputs
Page: 16 of 24
© 2005-2008 TERIDIAN Semiconductor Corporation
Rev 1.5
TERIDIAN [ TERIDIAN SEMICONDUCTOR CORPORATION ]
