15. Humidity （Steady State）
Appearance
: No abnormality
Capacitance change
Q
: Within ±5% or ±0.5pF, whichever is larger.
: C＜10pF : Q≧200＋10C
Standard
10≦C＜30pF : Q≧275＋2.5C
C≧30pF:Q≧350（C：Nominal capacitance）
: 1000 MΩ min.
Temperature
Compensating（Class1）
Insulation resistance
Appearance
: No abnormality
: Within ±0.5pF,
: 1000 MΩ min.
Specified
Value
High Frequency Type Capacitance change
Insulation resistance
Appearance
: No abnormality
Capacitance change
: Within ±12.5% （BJ, B7, C6, C7, LD(※)）
Within ±30% （F）
High Permittivity （Class2） Note 1
Dissipation factor
: 5.0% max.（BJ, B7, C6, C7, LD(※)）
11.0% max.（F）
Insulation resistance
: 50 MΩμF or 1000 MΩ whichever is smaller.
Note: ※LD Low distortion high value multilayer ceramic capacitor
Class 1
Class 2
All items
Standard
40±2℃
High Frequency Type
60±2℃
Preconditioning
Temperature
Humidity
None
Thermal treatment（ at 150℃ for 1 hr） Note 2
40±2℃
Test
Methods and
Remarks
90 to 95%RH
90 to 95%RH
Duration
500＋24/－0 hrs
500＋24/－0 hrs
Recovery
6 to 24 hrs （Standard condition） Note 5
24±2 hrs （Standard condition） Note 5
16. Humidity Loading
Appearance
: No abnormality
Capacitance change
: Within ±7.5% or ±0.75pF, whichever is larger.
: C＜30pF：Q≧100＋10C/3
Standard
Q
C≧30pF：Q≧200 （C：Nominal capacitance）
: 500 MΩ min.
Insulation resistance
Temperature
Compensating（Class1）
Appearance
: No abnormality
Capacitance change
: C≦2pF：Within ±0.4 pF
C＞2pF：Within ±0.75 pF
（C：Nominal capacitance）
: 500 MΩ min.
High Frequency Type
Specified
Value
Insulation resistance
Appearance
: No abnormality
Capacitance change
: Within ±12.5% （BJ, B7, C6, C7, LD(※)）
Within ±30% （F）
High Permittivity （Class2） Note 1
Dissipation factor
: 5.0% max. （BJ, B7, C6, C7, LD(※)）
11.0% max. （F）
Insulation resistance
: 25 MΩμF or 500 MΩ, whichever is smaller.
Note: ※LD Low distortion high value multilayer ceramic capacitor
Class 1
Class 2
Standard
High Frequency Type
All items
Preconditioning
Voltage treatment
None
（Rated voltage are applied for 1 hour at 40℃） Note 3
Temperature
Humidity
40±2℃
60±2℃
40±2℃
Test
Methods and
Remarks
90 to 95%RH
500＋24/－0 hrs
Rated voltage
90 to 95%RH
Duration
500＋24/－0 hrs
Rated voltage
Applied voltage
Charge/discharge
current
50mA max.
50mA max.
Recovery
6 to 24 hrs （Standard condition） Note 5
24±2 hrs（Standard condition） Note 5
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_reli_e-01
TAIYO YUDEN [ TAIYO YUDEN (U.S.A.), INC ]
