13. Resistance to Soldering
Appearance
: No abnormlty
Capacitance change
Q
: Within ±2.5% or ±0.25pF, whichever is larger.
: Initial value
Standard
Insulation resistance
Withstanding voltage
: Initial value
（between terminals） : No abnormality
Temperature
Compensating（Class1）
Appearance
: No abnormality
Capacitancecange
Q
: Within ±2.5%
: Initial value
High Frequency Type
Specified
Value
Insulation resistance
Withstanding voltage
: Initial value
（between terminals） : No abnormality
Appearance
: No abnormality
Capactace change
: Within ±7.5%（BJ, B7, C6, C7, LD(※)）
Within ±20%（F）
High Permittivity （Class2） Note 1
Dissipation factor
: Initial value
Insulation resistance
Withstanding voltage
: Initial value
（between terminals）: No abnormality
Note: ※LD Low distortion high value multilayer ceramic capacitor
lss 1
042, 063 Type
105 Type
Preconditioning
Preheating
None
80 to 100℃, 2 to 5 min.
150 to 200℃, 2 to 5 min.
270±5℃
150℃, 1 to 2 min.
Solder temp.
Duration
3±0.5 sec.
Recovery
6 to 24 hrs （Standard condition） Noe 5
Test
Methods and
Remarks
Class 2
105, 107, 212 Type
042、063 Type
316, 325 Type
Preconditioning
Preheating
Thermal treatment （at 150℃ for 1 hr） Note 2
80 to 100℃, 2 to 5 min.
150 to 200℃, 2 to 5 min.
270±5℃
80 to 100℃, 5 to 10 min.
150 to 200℃, 5 to 10 min.
150℃, 1 to 2 min.
Solder temp.
Duration
3±0.5 sec.
Recovery
24±2 hrs （Standard condition） Note 5
14. Temperature Cycle (Thermal Shock）
Appearance
: No abnormality
Capacitance change
Q
: Within ±2.5% or ±0.25pF, whichever is larger.
: Initial value
Standard
Insulation resistance
Withstanding voltage
: Initial value
（between terminals） : No abnormality
Temperature
Compensating（Class1）
Appearance
: No abnormality
Capacitance change
Q
: Within ±0.25pF
: Initial value
High Frequency Type
Specified
Value
Insulation resistance
Withstanding voltage
: Initial value
（between terminals） : No abnormality
Appearance
: No abnormality
Capacitance change
: Within ±7.5% （BJ, B7, C6, C7, LD(※)）
Within ±20% （F）
High Permittivity （Class2） Note 1
Dissipation factor
: Initial value
Insulation resistance
Withstanding voltage
: Initial value
（between terminals） : No abnormality
Note: ※LD Low distortion high value multilayer ceramic capacitor
Class 1
None
Class 2
Thermal treatment （at 150℃ for 1 hr）
Note 2
Preconditioning
Step
Temperature（℃）
Time（min.）
Test
1
2
3
4
Minimum operating temperature
Normal temperature
30±3
2 to 3
30±3
2 to 3
Methods and
Remarks
1 cycle
Maximum operating temperature
Normal temperature
Number of cycles
Recovery
5 times
6 to 24 hrs （Standard condition） Note 5
24±2 hrs （Standard condition） Note 5
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_reli_e-01
TAIYO YUDEN [ TAIYO YUDEN (U.S.A.), INC ]
