HV110
Ordering Information
Pin Configuration
VNN
Package Option
5-Lead TO-252 (D-PAK)
HV110K4-G
Device
HV110
-G indicates package is RoHS compliant (‘Green’)
5-Lead TO-252 (D-PAK) (K4)
Absolute Maximum Ratings
Pin Description
Pin
Function
Parameter
Value
-0.5V to +90V
-40°C to +85°C
-65° to +150°C
1
VPP
VNN
Positive voltage supply input
Supply voltage, VPP
Negative voltage power supply input
Operating temperature range
Storage temperature range
Internal N-channel MOSFET drain
output
DRAIN
5-Lead D-PAK thermal resistance Rθja
(minimum footprint)
UVLO/Enable input1
110°C/W
UV/ENABLE Under voltage lockout input
PWRGD Active-low power good output
6.0V
90V
PWRGD open collector input1
Product Marking
Absolute Maximum Ratings are those values beyond which damage to devicemay occur.
Functional operation under these conditions is not implied. Continuous operation of the
device at the absolute rating level my affect reliability. All voltages are references to
VNN pin.
YY = Year Sealed
YYWW
HV110K4
LLLLLLL
WW = Week Sealed
L = Lot Number
Note:
= “Green” Packaging
1. The HV110 will work in both positive and negative voltage applications, the maxi-
mum differential voltage between the VPP and VNN pins must not be exceeded.
5-Lead TO-252 (D-PAK)
Electrical Characteristics (at 0°C < TA < +75°C, unless otherwise specified)
Sym
VPP
Parameter
Supply voltage1
Min
36
-
Typ Max Units Conditions
-
-
57
1.0
34
42
-
V
VPP referenced to VNN
IPP
Supply current
mA VPP = -48V, standby mode. MOSFET off.
VUVLO
VUVHO
VHYS
VUVTH
RUVLO
RDS
Internal UVLO threshold (turn-off)2
Internal UVLO threshold (turn-on)2
UVLO comparator hysteresis
UVLO comparator threshold
UVLO input resistance
MOSFET on-resistance
Output leakage current
Operating output current
Inrush current limit
30
38
-
32
40
8.0
1.2
100
1.0
-
V
V
VPP referenced to VNN
VPP referenced to VNN
---
V
1.1
-
1.3
-
V
Referenced to VNN
---
Measured at 25OC and IDS = 200mA
kΩ
Ω
-
1.6
10
350
400
400
20
-
ILEAK
IOUT
IINRUSH
IOC
-
µA
Internal MOSFET off
-
-
mA ---
300
300
1.0
-
350
350
10
4.25
mA ---
Over load current limiting
Minimum current threshold
Slew rate to enable turn-on timers
mA ---
IMIN
mA ---
VSLEW
V/ms Enables timers
Notes:
1. The HV110 will work in both positive and negative voltage applications, the maximum differential voltage between the VPP and VNN pins must not be exceeded.
2. UVLO Threshold to be modified using external resistors, when a Zener diode is connected to VPP pin. (See Signature Detection)
2