SMM665B
Preliminary Information
PART MARKING
Summit Part Number
SUMMIT
Status Tracking Code
(Blank, MS, ES, 01, 02,...)
(Summit Use)
SMM665BF
xx
AYYWW
Annn
Pin 1
Date Code (YYWW)
Lot tracking code (Summit use)
Part Number suffix (Contains Customer specific programming and
ordering requirements. The default device ordering number is not
marked on the device)
Drawing not to scale
Product Tracking Code (Summit use)
ORDERING INFORMATION
SMM665B
nnn
C
F
Summit
Part
Part Number Suffix (see page 28)
Specific requirements are contained in the suffix such as
Hex code, Hex code revision, etc. The calibrated VREF voltage
Number
Temp Range settings are standard values of: 1.024, 1.225, 1.250, 2.048,
Package
F=48 Lead TQFP
C=Commercial
Blank=Industrial
2.500, 3.000 or 3.300
NOTICE
NOTE 1 - This is a Preliminary Information data sheet that describes a Summit product currently in pre-production with limited characterization.
Revision 1.1 - This document supersedes all previous versions. Data Sheet updates can be accessed by “right” or “left” mouse clicking on the link:
http://www.summitmicro.com/prod_select/summary/SMM665/SMM665.htm
Device Errata sheets can be accessed by “right” or “left” mouse clicking on the link: http://www.summitmicro.com/errata/SMM665B
SUMMIT Microelectronics, Inc. reserves the right to make changes to the products contained in this publication in order to improve design,
performance or reliability. SUMMIT Microelectronics, Inc. assumes no responsibility for the use of any circuits described herein, conveys no license
under any patent or other right, and makes no representation that the circuits are free of patent infringement. Charts and schedules contained
herein reflect representative operating parameters, and may vary depending upon a user’s specific application. While the information in this
publication has been carefully checked, SUMMIT Microelectronics, Inc. shall not be liable for any damages arising as a result of any error or
omission.
SUMMIT Microelectronics, Inc. does not recommend the use of any of its products in life support or aviation applications where the failure or
malfunction of the product can reasonably be expected to cause any failure of either system or to significantly affect their safety or effectiveness.
Products are not authorized for use in such applications unless SUMMIT Microelectronics, Inc. receives written assurances, to its satisfaction, that:
(a) the risk of injury or damage has been minimized; (b) the user assumes all such risks; and (c) potential liability of SUMMIT Microelectronics, Inc.
is adequately protected under the circumstances.
© Copyright 2004 SUMMIT MICROELECTRONICS, Inc. PROGRAMMABLE ANALOG FOR A DIGITAL WORLD™
ADOCTM is a registered trademark of Summit Microelectronics Inc., I C is a trademark of Philips Corporation.
2
Summit Microelectronics, Inc
2089 1.1 10/20/04
30
SUMMIT [ SUMMIT MICROELECTRONICS, INC. ]
