SMM153
APPLICATIONS INFORMATION (CONTINUED)
The end user can obtain the Summit SMX3202
programming system for device prototype development.
The SMX3202 system consists of a programming
Dongle, cable and WindowsTM GUI software. It can be
ordered on the website or from a local representative.
The latest revisions of all software and an application
brief describing the SMX3202 is available from the
website (www.summitmicro.com).
The Windows GUI software will generate the data and
send it in I2C serial bus format so that it can be directly
downloaded to the SMM153 via the programming
Dongle and cable. An example of the connection
interface is shown in Figure 5.
When design prototyping is complete, the software can
generate a HEX data file that should be transmitted to
Summit for approval. Summit will then assign a unique
customer ID to the HEX code and program production
devices before the final electrical test operations. This
will ensure proper device operation in the end
application.
The SMX3202 programming Dongle/cable interfaces
directly between a PC’s USB port and the target
application. The device is then configured on-screen via
an intuitive graphical user interface employing drop-
down menus.
Top view of straight 0.1" x 0.1 closed-side
connector. SMX3202 interface cable connector.
D1
Jumper
Pin 10, Reserved
Pin 8, Reserved
Pin 6, MR#
Pin 9, 5V
Pin 7, 10V
Pin 5, Reserved
Pin 3, GND
Pin 1, GND
Positive
1N4148
Supply
Pin 4, SDA
Pin 2, SCL
VDD
10 9
8
6
4
2
7
5
3
1
C1
0.1μF
SMM153
WP
SDA
SCL
GND
Common
Ground
Figure 5 – SMX3202 Programmer I2C serial bus connections to program the SMM153. The SMM153 has a Write
Protect pin (WP input) which when, asserted, prevents writing to the configuration registers and EE memory. In addition,
there is a configuration register lock bit, which, once programmed, does not allow the configuration registers to be
changed.
Summit Microelectronics, Inc
2134 3.0 1/20/2010
11