SMB113A/B/SMB117/A
Preliminary Information
I2C PROGRAMMING INFORMATION (CONTINUED)
GRAPHICAL USER INTERFACE (GUI)
interaction of the various functional blocks.
A
programming Dongle (SMX3200) is available from
Summit to communicate with the SMB113A/B and
SMB117/A. The Dongle connects directly to the
parallel port of a PC and programs the device through
a cable using the I2C bus protocol. See figure 11 and
the SMX3200 Data Sheet.
Device configuration utilizing the Windows based
SMB113A/B/117/A graphical user interface (GUI) is
highly recommended. The software is available from
the Summit website (http://www.summitmicro.com ).
Using the GUI in conjunction with this datasheet,
simplifies the process of device prototyping and the
Slave
Register Type
Address
Configuration Registers are located in
00 HEX thru 9FHEX
0000000BIN
to
General-Purpose Memory Block 0 is
located in A0 HEX thru BFHEX
General-Purpose Memory Block 1 is
located in C0 HEX thru FFHEX
1111111BIN
Table 1 – Possible address bytes used by the SMB113A/B and the SMB117/A.
Summit Microelectronics, Inc
2111 2.4 6/24/2008
29
SUMMIT [ SUMMIT MICROELECTRONICS, INC. ]
