SMB113A/B/SMB117/A
Preliminary Information
DEVELOPMENT HARDWARE & SOFTWARE
The end user can obtain the Summit SMX3200
parallel port programming system or the I2C2USB
(SMX3201) USB programming system for device
prototype development. The SMX3200(1) system
device is then configured on-screen via an intuitive
graphical user interface employing drop-down menus.
The Windows GUI software will generate the data and
send it in I2C serial bus format so that it can be directly
downloaded to the SMB113A/B or SMB117/A via the
programming Dongle and cable. An example of the
connection interface is shown in Figure 11.
consist of
a
programming Dongle, cable and
WindowsTM GUI software. It can be ordered on the
website or from a local representative. The latest
revisions of all software and an application brief
describing the SMX3200 and SMX3201 are available
from the website (http://www.summitmicro.com).
When design prototyping is complete, the software
can generate a HEX data file that should be
transmitted to Summit for approval. Summit will then
assign a unique customer ID to the HEX code and
program production devices before the final electrical
The SMX3200 programming Dongle/cable interfaces
directly between a PC’s parallel port and the target
application; while the SMX3201 interfaces directly to
the PC’s USB port and the target application. The
test operations.
This will ensure proper device
operation in the end application.
Top view of straight 0.1" x 0.1 closed-side
connector. SMX3200/SMX3201 interface cable
connector.
Pin 9, 5.0V
Pin 10, Reserved
Pin 8, Reserved
Pin 6, MR#
Pin 7, 10V
Pin 5, Reserved
Pin 3, GND
Pin 1, GND
VBATT
Pin 4, SDA
Pin 2, SCL
10 9
SMB113A/B
8
6
4
2
7
5
3
1
0.1µF
SMB117/A
SDA
SCL
GND
Figure 11 – SMX3200/SMX3201 Programmer I2C serial bus connections to program the SMB113A/B or
SMB117/A.
Summit Microelectronics, Inc
2111 2.4 6/24/2008
27
SUMMIT [ SUMMIT MICROELECTRONICS, INC. ]
