STM8S003F3 STM8S003K3
Electrical characteristics
9.3.1
VCAP external capacitor
Stabilization for the main regulator is achieved connecting an external capacitor C
to the
EXT
V
pin. C
is specified in Table 19. Care should be taken to limit the series inductance
CAP
EXT
to less than 15 nH.
Figure 10. External capacitor C
EXT
(6/
&
(65
5/HDN
06Yꢀꢁꢂꢄꢄ9ꢅ
1. Legend: ESR is the equivalent series resistance and ESL is the equivalent inductance.
9.3.2
Supply current characteristics
The current consumption is measured as described in Section 9.1.6: Pin input voltage.
Total current consumption in run mode
The MCU is placed under the following conditions:
•
•
All I/O pins in input mode with a static value at V or V (no load)
DD SS
All peripherals are disabled (clock stopped by Peripheral Clock Gating registers)
except if explicitly mentioned.
Subject to general operating conditions for V and T .
DD
A
DocID018576 Rev 5
51/103
87