DC and AC parameters
M41T81
5
DC and AC parameters
This section summarizes the operating and measurement conditions, as well as the DC and
AC characteristics of the device. The parameters in the following DC and AC Characteristic
tables are derived from tests performed under the Measurement Conditions listed in the
relevant tables. Designers should check that the operating conditions in their projects match
the measurement conditions when using the quoted parameters.
(1)
Table 7.
Operating and AC measurement conditions
Parameter
M41T81
Supply voltage (VCC
)
2.0 to 5.5V
–40 to 85°C
100pF
Ambient operating temperature (TA)
Load capacitance (CL)
Input rise and fall times
≤50ns
Input pulse voltages
0.2VCC to 0.8 VCC
0.3VCC to 0.7 VCC
Input and output timing ref. voltages
1. Output Hi-Z is defined as the point where data is no longer driven.
Figure 14. AC measurement I/O waveform
0.8V
CC
0.7V
0.3V
CC
CC
0.2V
CC
AI02568
Table 8.
Symbol
Capacitance
Parameter(1) (2)
Min
Max
Unit
CIN
COUT
tLP
Input capacitance
Output capacitance
Low-pass filter input time constant (SDA and SCL)
7
pF
pF
ns
(3)
10
50
1. Effective capacitance measured with power supply at 5V; sampled only, not 100% tested.
2. At 25°C, f = 1MHz.
3. Outputs deselected.
22/30