Mechanical and electrical specifications
LIS3DH
2.5
Absolute maximum ratings
Stresses above those listed as “absolute maximum ratings” may cause permanent damage
to the device. This is a stress rating only and functional operation of the device under these
conditions is not implied. Exposure to maximum rating conditions for extended periods may
affect device reliability.
Table 8.
Symbol
Absolute maximum ratings
Ratings
Maximum value
Unit
Vdd
Supply voltage
-0.3 to 4.8
-0.3 to 4.8
V
V
Vdd_IO I/O pins Supply voltage
Input voltage on any control pin
Vin
-0.3 to Vdd_IO +0.3
V
(CS, SCL/SPC, SDA/SDI/SDO, SDO/SA0)
3000 for 0.5 ms
10000 for 0.1 ms
3000 for 0.5 ms
10000 for 0.1 ms
-40 to +85
g
g
APOW
Acceleration (any axis, powered, Vdd = 2.5 V)
g
AUNP
Acceleration (any axis, unpowered)
g
TOP
TSTG
ESD
Operating temperature range
Storage temperature range
°C
°C
kV
-40 to +125
Electrostatic discharge protection
2 (HBM)
Note:
Supply voltage on any pin should never exceed 4.8 V
This is a mechanical shock sensitive device, improper handling can cause permanent
damages to the part.
This is an ESD sensitive device, improper handling can cause permanent damages to
the part.
14/42
Doc ID 17530 Rev 1
STMICROELECTRONICS [ ST ]
