1.8V Serial Quad I/O (SQI) Flash Memory
SST26WF032
Advance Information
Lockdown Block-Protection Register (LBPR)
The Lockdown Block-Protection Register instruction prevents changes to the Block-Protection Regis-
ter. Lockdown resets after power cycling; this allows the Block-Protection Register to be changed.
To execute a Lockdown Block-Protection Register, the host drives CE# low, then sends the Lockdown
Block-Protection Register command cycle (8DH), then drives CE# high. A cycle is two nibbles long,
most significant nibble first.
CE#
MODE 3
MODE 0
0
1
SCK
SIO(3:0)
C1 C0
1409 F30.0
Note: C[1:0]=8DH
Figure 25:Lockdown Block-Protection Register
©2010 Silicon Storage Technology, Inc.
S71409-01-000
01/10
27
SST [ SILICON STORAGE TECHNOLOGY, INC ]
