S U P P L E M E N T
ABSOLUTE MAXIMUM RATINGS
Ambient Temperature
20 ns
20 ns
with Power Applied. . . . . . . . . . . . . . –40°C to +145°C
+0.8 V
V
/V (Note 1). . . . . . . . . . . . . . –0.5 V to + 3.0 V
CC IO
–0.5 V
–2.0 V
A9, OE#, and RESET# (Note 2). .–0.5 V to +13.0 V
Addresses, Data, Control Signals
(with the exception of CLK) . . . . . . .–0.5 V to 3.6 V
20 ns
All other pins (Note 1). . . . . . . . . . .–0.5 V to +5.5 V
Output Short Circuit Current (Note 3) . . . . . . 200 mA
Figure 1. Maximum Negative Overshoot
Waveform
Notes:
1. Minimum DC voltage on input or I/O pins is –0.5 V. During
voltage transitions, input at I/O pins may overshoot V to
SS
–2.0 V for periods of up to 20 ns. See Figure 13.
Maximum DC voltage on output and I/O pins is 3.6 V.
During voltage transitions output pins may overshoot to
20 ns
V
+ 2.0 V for periods up to 20 ns. See Figure 14.
CC
VCC
+2.0 V
VCC
+0.5 V
2. Minimum DC input voltage on pins A9, OE#, and RESET#
is -0.5 V. During voltage transitions, A9, OE#, and
RESET# may overshoot V to –2.0 V for periods of up to
SS
20 ns. See Figure 13. Maximum DC input voltage on pin
A9 and OE# is +13.0 V which may overshoot to 14.0 V for
periods up to 20 ns.
2.0 V
20 ns
20 ns
3. No more than one output may be shorted to ground at a
time. Duration of the short circuit should not be greater
than one second.
Figure 2. Maximum Positive Overshoot
Waveform
4. Stresses above those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device.
This is a stress rating only; functional operation of the de-
vice at these or any other conditions above those indicated
in the operational sections of this data sheet is not implied.
Exposure of the device to absolute maximum rating condi-
tions for extended periods may affect device reliability.
OPERATING RANGES
Industrial (I) Devices
Ambient Temperature (T ) . . . . . . . . . –40°C to +85°C
A
Extended (E) Devices
Ambient Temperature (T ) . . . . . . . . –40°C to +125°C
A
V
V
V
V
Supply Voltages
CC
CC
IO
for regulated voltage range. . . . . .2.5 V to 2.75 V
Supply Voltages
. . . . . . . . . . . . . . . . . . . . . . . . . . .1.65 V to 2.75 V
IO
Operating ranges define those limits between which the
functionality of the device is guaranteed.
12
Am29BDD160G Known Good Die—Die Revision 1
SPANSION [ SPANSION ]
