欢迎访问ic37.com |
会员登录 免费注册
发布采购

EMC1403-1-AIZL-TR 参数 Datasheet PDF下载

EMC1403-1-AIZL-TR图片预览
型号: EMC1403-1-AIZL-TR
PDF下载: 下载PDF文件 查看货源
内容描述: 1°C温度传感器与beta补偿 [1∑C Temperature Sensor with Beta Compensation]
分类和应用: 传感器换能器温度传感器输出元件
文件页数/大小: 42 页 / 732 K
品牌: SMSC [ SMSC CORPORATION ]
 浏览型号EMC1403-1-AIZL-TR的Datasheet PDF文件第11页浏览型号EMC1403-1-AIZL-TR的Datasheet PDF文件第12页浏览型号EMC1403-1-AIZL-TR的Datasheet PDF文件第13页浏览型号EMC1403-1-AIZL-TR的Datasheet PDF文件第14页浏览型号EMC1403-1-AIZL-TR的Datasheet PDF文件第16页浏览型号EMC1403-1-AIZL-TR的Datasheet PDF文件第17页浏览型号EMC1403-1-AIZL-TR的Datasheet PDF文件第18页浏览型号EMC1403-1-AIZL-TR的Datasheet PDF文件第19页  
1°C Temperature Sensor with Beta Compensation  
Datasheet  
Chapter 5 Product Description  
The EMC1403 and EMC1404 are SMBus temperature sensors. The EMC1403 monitors one internal  
diode and two externally connected temperature diodes. The EMC1404 monitors one internal diode  
and three externally connected temperature diodes.  
Thermal management is performed in cooperation with a host device. This consists of the host reading  
the temperature data of both the external and internal temperature diodes of the EMC1403 and  
EMC1404 and using that data to control the speed of one or more fans.  
The EMC1403 and EMC1404 have two levels of monitoring. The first provides a maskable ALERT  
signal to the host when the measured temperatures exceeds user programmable limits. This allows  
the EMC1403 or EMC1404 to be used as an independent thermal watchdog to warn the host of  
temperature hot spots without direct control by the host. The second level of monitoring provides a non  
maskable interrupt on the THERM pin if the measured temperatures meet or exceed a second  
programmable limit.  
Since the EMC1403 and EMC1404 automatically correct for temperature errors due to series  
resistance in temperature diode lines, there is greater flexibility in where external diodes are positioned  
and better measurement accuracy than previously available with non-resistance error correcting  
devices. The automatic beta detection feature means that there is no need to program the device  
according to which type of diode is present on the External Diode 1 channel. Therefore, the  
EMC1403/EMC1404 can power up ready to operate for any system configuration.  
For the EMC1404, External Diode channels 2 and 3 are only compatible with general purpose diodes  
(such as a 2N3904).  
Figure 5.1 shows a system level block diagram of the EMC1403. Figure 5.2 shows a system level block  
diagram of the EMC1404.  
EMC1403  
CPU  
Host  
DP1  
DN1  
Thermal  
diode  
SMCLK  
Internal  
Diode  
SMDATA  
SMBus  
Interface  
ALERT  
DP2  
DN2  
THERM  
Power Control  
Figure 5.1 System Diagram for EMC1403  
SMSC EMC1403/EMC1404  
Revision 1.16 (03-15-07)  
DATA1S5HEET  
 复制成功!