5 and 6 Channel Capacitive Touch Sensor
Datasheet
The address pointer will return to 00h after reaching FFh.
3.4.4
SPI Timeout
The CAP1005 does not detect any timeout conditions on the SPI bus.
3.5
Normal SPI Protocols
When operating in normal mode, the SPI bus internal address pointer is incremented depending upon
which command has been transmitted. Multiple commands may be transmitted sequentually so long
as the SPI_CS# pin is asserted low. Figure 3.1 shows an example of this operation.
Revision 1.1 (08-05-09)
SMSC CAP1005 / CAP1006
DATA1S8HEET