iPAC™ FEM FOR QUAD-BAND GSM / GPRS
DATA SHEET • SKY77500
Package Dimensions and Pin Description
Figure 3 is a mechanical diagram of the pad layout for the
SKY77500, a 32-pin leadless quad-band FEM module. Figure 4
provides a recommended phone board layout footprint for the
FEM to help the designer attain optimum thermal conductivity,
good grounding, and minimum RF discontinuity for the 50-ohm
terminals. Figure 5 shows the device pin configuration and the pin
numbering convention, which starts with pin 1 at the upper left,
as indicated, and increments counter-clockwise around the
package. Table 5 lists the pin names and signal descriptions.
Typical case markings are shown in Figure 6.
Figure 3. SKY77500 FEM Package Dimensions – 32-pin Leadless (All Views)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
103146A • Skyworks Proprietary information. • Products and product information are subject to change without notice. • May 16, 2005
13