SiM3C1xx
Table 3.2. Power Consumption (Continued)
Parameter
Symbol
Conditions
Min
Typ
Max
Units
Analog Peripheral Supply Currents
Voltage Regulator (VREG0)
I
Normal Mode, T = 25 °C
BGDIS = 0, SUSEN = 0
—
—
—
—
—
—
300
—
—
650
—
µA
µA
µA
µA
nA
nA
VREGIN
A
Normal Mode, T = 85 °C
A
BGDIS = 0, SUSEN = 0
Suspend Mode, T = 25 °C
75
—
A
BGDIS = 0, SUSEN = 1
Suspend Mode, T = 85 °C
115
—
A
BGDIS = 0, SUSEN = 1
Sleep Mode, T = 25 °C
90
—
A
BGDIS = 1, SUSEN = X
Sleep Mode, T = 85 °C
500
A
BGDIS = 1, SUSEN = X
External Regulator (EXTVREG0)
I
Regulator
—
—
—
—
—
—
215
7
250
—
µA
µA
mA
µA
µA
nA
EXTVREG
Current Sensor
PLL0 Oscillator (PLL0OSC)
I
Operating at 80 MHz
Operating at 20 MHz
Operating at 2.5 MHz
Operating at 16.4 kHz,
1.75
190
40
1.86
—
PLLOSC
Low-Power Oscillator (LPOSC0)
I
LPOSC
—
Low-Frequency Oscillator
(LFOSC0)
I
215
—
LFOSC
T = 25 °C
A
Operating at 16.4 kHz,
—
—
500
nA
T = 85 °C
A
Notes:
1. Perhipheral currents drop to zero when peripheral clock and peripheral are disabled, unless otherwise noted.
2. Currents are additive. For example, where I is specified and the mode is not mutually exclusive, enabling the
DD
functions increases supply current by the specified amount.
3. Includes all peripherals that cannot have clocks gated in the Clock Control module.
4. Includes supply current from internal regulator and PLL0OSC (>20 MHz) or LPOSC0 (<=20 MHz).
5. Flash execution numbers use 2 wait states for 80 MHz and 0 wait states at 20 MHz or less.
6. RAM execution numbers use 0 wait states for all frequencies.
7. IDAC output current and IVC input current not included.
8. Bias current only. Does not include dynamic current from oscillator running at speed.
Preliminary Rev. 0.8
9