E0C63P466
The PROM writer does not supply the source voltage to the E0C63P466 during serial programming. Therefore,
supply a 5V source voltage between the V
DD
and V
SS
terminals and between the V
DDF
and V
SS
terminals of the
E0C63P466. Furthermore, to start a serial programming, an initial reset to the E0C63P466 is required. Use the
RESET terminal to reset the E0C63P466 securely.
Parallel Programming Mode
The parallel programming can be performed by installing the E0C63P466 to the exclusive PROM writer via the
adaptor socket. In this mode, it is not necessary to set up the programming terminals since it is controlled by the
exclusive PROM writer. For the E0C63P466, the adaptor socket for the QFP17-144pin package only is available.
Note that the QFP8-144pin and QFP5-128pin packages are not supported.
Package type
QFP17-144pin
QFP8-144pin
QFP5-128pin
Adapter socket support
Available
Not available
Not available
When using a package other than QFP17-144pin or a die form, perform on-board programming in Serial Pro-
gramming mode.
5