ML5805
Configuration Register Serial Word
The configuration registers are written only during standby mode (XCEN=0). These data registers are volatile and will
erase when VCC is removed. The format is shown below.
Bit
Value
Definition
23
1
This is a configuration register transaction.
Value Definition
0
1
Normal operation
22
RESET
Perform reset operation. Must be asserted
on first serial transfer.
21
1
Must be set to write to register.
Register address (value = 0, 1, 2, 3, or 4)
Configuration Register data.
20:16
15:0
ADDRESS
CDATA
All registers (R0, R1, R2, R3, and R4) will be loaded with default values and need to be initialized by the system base
band hardware for the data rate used. See Table 6 following this section.
RF MICRO DEVICES®, RFMD®, OPTIMUM TECHNOLOGY MATCHING®, ENABLING WIRELESS CONNECTIVITY™, POWERSTAR®, POLARIS™ TOTAL RADIO™ ULTIMATEBLUE™ AND FASTWAVE™ ARE TRADEMARKS OF RFMD, LLC. BLUETOOTH IS A TRADEMARK OWNED BY
BLUETOOTH SIG, INC., U.S.A. AND LICENSED FOR USE BY RFMD. ALL OTHER TRADE NAMES, TRADEMARKS AND REGISTERED TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. ©2006, RF MICRO DEVICES, INC.
PRELIMINARY DATA SHEET
APRIL 2008
EDS-106041 REV P01
7628 THORNDIKE ROAD, GREENSBORO, NC 27409-9421 · FOR SALES OR TECHNICAL
REV A1 DS071026 SUPPORT, CONTACT RFMD AT (+1) 336-678-5570 OR SALES-SUPPORT@RFMD.COM
22
RFMD [ RF MICRO DEVICES ]
