M16C/62 Group (M16C/62P, M16C/62PT)
1. Overview
Table 1.13 Pin Description (80-pin Version) (2)
Power
supply
Signal name
Pin name I/O type
Description
Reference voltage VREF
input
I
VCC1
Applies the reference voltage for the A-D converter and D-A converter.
A-D converter
AN0 to AN7,
I
VCC1
Analog input pins for the A-D converter
AN0_0 to AN0_7,
AN2_0 to AN2_7
___________
ADTRG
ANEX0
I
VCC1
VCC1
This is an A-D trigger input pin.
I/O
This is the extended analog input pin for the A-D converter, and is the output
in external op-amp connection mode.
ANEX1
I
VCC1
VCC1
VCC1
This is the extended analog input pin for the A-D converter.
This is the Input pin for the D-A converter
D-A converter
I/O port
DA0, DA1
O
P0_0 to P0_7,
P2_0 to P2_7,
P3_0 to P3_7,
P5_0 to P5_7,
P6_0 to P6_7,
P10_0 to P10_7
P8_0 to P8_4,
P8_6, P8_7,
P9_0,
I/O
8-bit I/O ports in CMOS, having a direction register to select an input or
output.
Each pin is set as an input port or output port. An input port can be set for a
pull-up or for no pull-up in 4-bit unit by program.
I/O
VCC1
I/O ports having equivalent functions to P0.
P9_2 to P9_7
P4_0 to P4_3,
P7_0, P7_1,
P7_6, P7_7
P8_5
I/O
I
VCC1
VCC1
I/O ports having equivalent functions to P0.
(except P7_0 and P7_1 for the N-channel open drain output.)
Input port
Input pin for the _N__M___I_ interrupt.
Pin states can be read by the P8_5 bit in the P8 register.
I : Input
O : Output
I/O : Input and output
NOTES:
1. There is no external connections for port P1, P4_4 to P4_7, P7_2 to P7_5 and P9_1 in 80-pin version.
Set the direction bits in these ports to “1” (input mode), and set the output data to “0” (“L”) using the program.
page 20
Rev.2.10 Nov. 07, 2003
of 84