M16C/62 Group (M16C/62P, M16C/62PT)
1. Overview
Table 1.11 Pin Description (100-pin and 128-pin Version) (3)
Power
supply
Signal name
Pin name I/O type
Description
Reference voltage VREF
input
I
VCC1
Applies the reference voltage for the A-D converter and D-A converter.
A-D converter
AN0 to AN7,
I
VCC1
Analog input pins for the A-D converter
AN0_0 to AN0_7,
AN2_0 to AN2_7
___________
ADTRG
ANEX0
I
VCC1
VCC1
This is an A-D trigger input pin.
I/O
This is the extended analog input pin for the A-D converter, and is the output
in external op-amp connection mode.
ANEX1
I
VCC1
VCC1
VCC2
This is the extended analog input pin for the A-D converter.
This is the Input pin for the D-A converter.
D-A converter
I/O port
DA0, DA1
O
P0_0 to P0_7,
P1_0 to P1_7,
P2_0 to P2_7,
P3_0 to P3_7,
P4_0 to P4_7,
P5_0 to P5_7,
P12_0 to
I/O
8-bit I/O ports in CMOS, having a direction register to select an input or output.
Each pin is set as an input port or output port. An input port can be set for a
pull-up or for no pull-up in 4-bit unit by program.
P12_7 (2)
P13_0 to
P13_7 (2)
,
P6_0 to P6_7,
P7_0 to P7_7,
P9_0 to P9_7,
P10_0 to P10_7,
P11_0 to
I/O
VCC1
8-bit I/O ports having equivalent functions to P0.
(except P7_0 and P7_1 for the N-channel open drain output.)
P11_7 (2)
P8_0 to P8_4,
P8_6, P8_7,
P14_0, P14_1(2)
P8_5
I/O
I
VCC1
VCC1
I/O ports having equivalent functions to P0.
Input port
Input pin for the _N__M___I_ interrupt.
Pin states can be read by the P8_5 bit in the P8 register.
I : Input
O : Output
I/O : Input and output
NOTES:
1. When use VCC1 ≥ VCC2, contacts due to some points or restrictions to be checked.
2. Ports P11 to P14 are provided in the 128-pin version only.
page 18
Rev.2.10 Nov. 07, 2003
of 84