Section 13 Timer Z
Counter cleared by GRA compare match
TCNT value
GRA_0
GRB_0
GRA_1
GRB_1
H'0000
Time
FTIOB0
FTIOD0
FTIOA1
FTIOC1
FTIOB1
FTIOD1
FTIOC0
Figure 13.28 Example of Reset Synchronous PWM Mode Operation (OLS0 = OLS1 = 0)
In reset synchronous PWM mode, TCNT_0 and TCNT_1 perform increment and independent
operations, respectively. However, GRA_1 and GRB_1 are separated from TCNT_1. When a
compare match occurs between TCNT_0 and GRA_0, a counter is cleared and an increment
operation is restarted from H'0000.
The PWM pin outputs 0 or 1 whenever a compare match between GRB_0, GRA_1, GRB_1 and
TCNT_0 or counter clearing occur.
For details on operations when reset synchronous PWM mode and buffer operation are
simultaneously set, refer to section 13.4.8, Buffer Operation.
Rev. 3.00 Sep. 10, 2007 Page 243 of 528
REJ09B0216-0300
RENESAS [ RENESAS TECHNOLOGY CORP ]
