16.1.3 Pin Configuration
Table 16.1 shows the SCIF pin configuration.
Table 16.1 SCIF Pins
Pin Name
Abbreviation
SCK2/05(6(7
MD2/RxD2
MD1/TxD2
&765
I/O
Function
Serial clock pin
Receive data pin
Transmit data pin
Modem control pin
Modem control pin
Input
Input
Output
I/O
Clock input
Receive data input
Transmit data output
Transmission enabled
Transmission request
MD8/5765
I/O
Note: After a power-on reset, these pins function as mode input pins MD0, MD1, MD2, MD7, and
MD8. These pins can function as serial pins by setting the SCIF operation with the TE, RE,
and CKE1 bits in SCSCR2 and the MCE bit in SCFCR2. These pins are made to function
as serial pins by performing SCIF operation settings with the TE, RE, and CKE1 bits in
SCSCR2 and the MCE bit in SCFCR2. Break state transmission and detection can be set in
the SCIF’s SCSPTR2 register.
Rev. 6.0, 07/02, page 660 of 986
RENESAS [ RENESAS TECHNOLOGY CORP ]
