3.7.6
UTLB Data Array 2
UTLB data array 2 is allocated to addresses H'F780 0000 to H'F7FF FFFF in the P4 area. A data
array access requires a 32-bit address field specification (when reading or writing) and a 32-bit
data field specification (when writing). Information for selecting the entry to be accessed is
specified in the address field, and SA and TC to be written to data array 2 are specified in the data
field.
In the address field, bits [31:23] have the value H'F78 indicating UTLB data array 2, and the entry
is selected by bits [13:8].
In the data field, TC is indicated by bit [3], and SA by bits [2:0].
The following two kinds of operation can be used on UTLB data array 2:
1. UTLB data array 2 read
SA and TC are read into the data field from the UTLB entry corresponding to the entry set in
the address field.
2. UTLB data array 2 write
SA and TC specified in the data field are written to the UTLB entry corresponding to the entry
set in the address field.
31
24 23
14 13
8 7
0
0
Address field
Data field
1 1 1 1 0 1 1 1 1
E
31
4 3 2
SA
TC
TC: Timing control bit
E: Entry
SA: Space attribute bits
: Reserved bits (0 write value, undefined read
value)
Figure 3.18 Memory-Mapped UTLB Data Array 2
Rev. 6.0, 07/02, page 93 of 986
RENESAS [ RENESAS TECHNOLOGY CORP ]
