TG-201902141228EP
(6) Thermal Design is paramount importance because heat generation may result in the
Characteristics decline, such as brightness decreased, Color change and so on. Please consider
the heat generation of the LEDs when making the system design.LED
(7) Compared to standard encapsulants, silicone is generally softer, and the surface is more likely
to attract dust，requiring special care during processing. In cases where a minimal level of dirt
and dust particles cannot be guaranteed, a suitable cleaning solution must be applied to the
surface after the soldering of components. Refond suggests using isopropyl alcohol for cleaning.
In case other solvents are used, it must be assured that these solvents do not dissolve the
package or resin. Ultrasonic cleaning is not recommended. Ultrasonic cleaning may cause
damage to the LED.
(8) To avoid the moisture penetration, we recommend store in a dry box with a desiccant. The
recommended storage temperature range is 5℃ to 30℃ and a maximum humidity of RH50%
(9)Similar to most Solid state devices; LEDs are sensitive to Electro-Static Discharge (ESD) and
Electrical Over Stress (EOS).
(10) Other points for attention, please refer to our relevant information.
Tel: +86-755-66839118 Fax:+86-755-66839300 E-mail:sales@refond.com Web: www.refond.com
REFOND:WI-E-045 A/3 REV:E/0
PAGE:21
REFOND [ SHENZHEN REFOND OPTOELECTRONICS CO.,LTD. ]
