欢迎访问ic37.com |
会员登录 免费注册
发布采购

RTL8110SCL-GR 参数 Datasheet PDF下载

RTL8110SCL-GR图片预览
型号: RTL8110SCL-GR
PDF下载: 下载PDF文件 查看货源
内容描述: 集成千兆以太网控制器( LOW ) ( MiniPCI接口) [INTEGRATED GIGABIT ETHERNET CONTROLLER(LOW)(MiniPCI)]
分类和应用: 控制器PC以太网以太网:16GBASE-T
文件页数/大小: 43 页 / 974 K
品牌: REALTEK [ Realtek Semiconductor Corp. ]
 浏览型号RTL8110SCL-GR的Datasheet PDF文件第8页浏览型号RTL8110SCL-GR的Datasheet PDF文件第9页浏览型号RTL8110SCL-GR的Datasheet PDF文件第10页浏览型号RTL8110SCL-GR的Datasheet PDF文件第11页浏览型号RTL8110SCL-GR的Datasheet PDF文件第13页浏览型号RTL8110SCL-GR的Datasheet PDF文件第14页浏览型号RTL8110SCL-GR的Datasheet PDF文件第15页浏览型号RTL8110SCL-GR的Datasheet PDF文件第16页  
RTL8110SC(L)  
Datasheet  
5.3. EEPROM  
Table 3. EEPROM  
Description  
Serial data clock.  
Symbol  
EESK  
Type  
O
Pin No  
111  
EEDI/AUX  
O/I  
109  
EEDI: Output to serial data input pin of EEPROM.  
AUX: Input pin to detect if Aux. Power exists or not on initial power-on.  
This pin should be connected to EEPROM. To support wakeup from ACPI  
D3cold or APM power-down, this pin must be pulled high to aux. power via  
a resistor. If this pin is not pulled high to Aux. Power, the RTL8110SC(L)  
assumes that no Aux. Power exists.  
EEDO  
EECS  
I
O
108  
106  
Input from serial data output pin of EEPROM.  
EECS: EEPROM chip select.  
5.4. Transceiver Interface  
Table 4. Transceiver Interface  
Symbol  
Type  
Pin No  
Description  
MDI[0]+  
I/O  
1
In MDI mode, this is the first pair in 1000Base-T, i.e. the BI_DA+/- pair, and is  
the transmit pair in 10Base-T and 100Base-TX.  
In MDI crossover mode, this pair acts as the BI_DB+/- pair, and is the receive  
pair in 10Base-T and 100Base-TX.  
MDI[0]  
I/O  
2
MDI[1]+  
I/O  
I/O  
5
6
In MDI mode, this is the second pair in 1000Base-T, i.e. the BI_DB+/- pair, and  
is the transmit pair in 10Base-T and 100Base-TX.  
In MDI crossover mode, this pair acts as the BI_DA+/- pair, and is the transmit  
pair in 10Base-T and 100Base-TX.  
MDI[1]−  
MDI[2]+  
MDI[2]−  
MDI[3]+  
MDI[3]−  
I/O  
I/O  
I/O  
I/O  
14  
15  
18  
19  
In MDI mode, this is the third pair in 1000Base-T, i.e. the BI_DC+/- pair.  
In MDI crossover mode, this pair acts as the BI_DD+/- pair.  
In MDI mode, this is the fourth pair in 1000Base-T, i.e. the BI_DD+/- pair.  
In MDI crossover mode, this pair acts as the BI_DC+/- pair.  
5.5. Clock  
Table 5. Clock  
Symbol  
Xtal1  
Xtal2  
Type  
I
O
Pin No Description  
121  
122  
Input of 25MHz clock reference.  
Output of 25MHz clock reference.  
5.6. Regulator & Reference  
Table 6. Regulator & Reference  
Symbol  
Type  
Pin No Description  
CTRL18  
O
8
Regulator Control. Voltage control to external 1.8V regulator.  
Regulator Control. Voltage control to external 1.5V regulator.  
Reference. External Resistor Reference.  
CTRL15  
RSET  
O
I
125  
127  
Integrated Gigabit Ethernet Controller (LOM) (MiniPCI)  
7
Track ID: JATR-1076-21 Rev. 1.2