RELEASED
PM7366 FREEDM-8
DATA SHEET
PMC-1970930
ISSUE 4
FRAME ENGINE AND DATA LINK MANAGER
Pin Name
Type
Pin No.
Function
-PI
-BI
SERRB
OD
Output
M20
M3
The active low system error signal (SERRB) indicates
an address parity error. Address parity errors are
detected when the even parity calculations during the
address phase do not match the PAR signal. When
the FREEDM-8 detects a system error, SERRB is set
low for one PCICLK period.
SERRB is enabled by setting the SERREN bit in the
Control/Status register in the PCI Configuration
registers space. Regardless of the setting of
SERREN, parity errors are always reported by the
SERR bit in the Control/Status register in the PCI
Configuration registers space.
SERRB is an open drain output and is updated on the
rising edge of PCICLK.
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA,INC., AND FOR ITS CUSTOMERS’ INTERNAL USE
23