欢迎访问ic37.com |
会员登录 免费注册
发布采购

PM7347-BI 参数 Datasheet PDF下载

PM7347-BI图片预览
型号: PM7347-BI
PDF下载: 下载PDF文件 查看货源
内容描述: SATURN用户网络接口的J2 / E3 / T3 [SATURN USER NETWORK INTERFACE for J2/E3/T3]
分类和应用: 网络接口
文件页数/大小: 341 页 / 1733 K
品牌: PMC [ PMC-SIERRA, INC ]
 浏览型号PM7347-BI的Datasheet PDF文件第133页浏览型号PM7347-BI的Datasheet PDF文件第134页浏览型号PM7347-BI的Datasheet PDF文件第135页浏览型号PM7347-BI的Datasheet PDF文件第136页浏览型号PM7347-BI的Datasheet PDF文件第138页浏览型号PM7347-BI的Datasheet PDF文件第139页浏览型号PM7347-BI的Datasheet PDF文件第140页浏览型号PM7347-BI的Datasheet PDF文件第141页  
S/UNI®-JET Data Sheet  
Released  
Register 334H: DS3 TRAN Configuration  
Bit  
Type  
R/W  
R/W  
R/W  
R/W  
R/W  
Function  
CBTRAN  
AIS  
IDL  
FERF  
Reserved  
Unused  
Unused  
CBIT  
Default  
Bit 7  
Bit 6  
Bit 5  
Bit 4  
Bit 3  
Bit 2  
Bit 1  
Bit 0  
0
0
0
0
0
X
X
0
R/W  
CBIT  
The CBIT bit enables the DS3 C-bit parity application. When CBIT is written with a logic  
one, C-bit parity is enabled, and the S/UNI-JET modifies the C-bits as required to include the  
path maintenance data link, the FEAC channel, the FEBE indication, and the path parity.  
When CBIT is written with a logic zero, the M23 application is selected, and each C-bit is set  
to logic one by the S/UNI-JET except for the first C-bit of the frame, which is forced to  
toggle every frame. Note: The C-bits may be modified as required using the DS3 overhead  
access port (TOH) regardless of the setting of this bit.  
FERF  
The FERF bit enables insertion of the far end receive failure maintenance signal in the DS3  
stream. When FERF is written with a logic one, the X1 and X2 overhead bit positions are set  
to logic zero. When FERF is written with a logic zero, the X1 and X2 overhead bit positions  
in the DS3 stream are set to logic one.  
IDL  
The IDL bit enables insertion of the idle maintenance signal in the DS3 stream. When IDL is  
written with a logic one, the DS3 payload is overwritten with the repeating pattern 1100.. The  
DS3 overhead bit insertion (X, P, M F, and C) continues normally. When IDL is written with  
a logic zero, the idle signal is not inserted.  
AIS  
The AIS bit enables insertion of the AIS maintenance signal in the DS3 stream. When AIS is  
written with a logic one, the DS3 payload is overwritten with the repeating pattern 1010.. The  
DS3 overhead bit insertion (X, P, M and F) continues normally. The values inserted in the C-  
bits during AIS transmission are controlled by the CBTRAN bit in this register. When AIS is  
written with a logic zero, the AIS signal is not inserted.  
Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers’ Internal Use  
Document ID: PMC-1990267, Issue 3  
137