PM7344 S/UNI-MPH
DATA SHEET
PMC-950449
ISSUE 6
MULTI-PHY USER NETWORK INTERFACE
Pin Name
Type
Pin Function
No.
TCK
TMS
Input
103 Test Clock (TCK). This signal provides timing for
test operations that can be carried out using the
IEEE P1149.1 test access port.
104 Test Mode Select (TMS). This signal controls the
test operations that can be carried out using the
IEEE P1149.1 test access port. TMS is sampled
on the rising edge of TCK. TMS has an integral
pull up resistor.
102 Test Data Input (TDI). This signal carries test
data into the S/UNI-MPH via the IEEE P1149.1
test access port. TDI is sampled on the rising
edge of TCK. TDI has an integral pull up
resistor.
Input
Input
TDI
TDO
Tristate
Output
101 Test Data Output (TDO). This signal carries test
data out of the S/UNI-MPH via the IEEE
P1149.1 test access port. TDO is updated on
the falling edge of TCK. TDO is a tri-state
output which is inactive except when scanning
of data is in progress.
TRSTB
Input
105 Active low Test Reset (TRSTB). This signal
provides an asynchronous S/UNI-MPH test
access port reset via the IEEE P1149.1 test
access port. TRSTB is a Schmitt triggered input
with an integral pull up resistor. TRSTB must be
asserted during the power up sequence.
Note that if not used, TRSTB must be
connected to the RSTB input.
VDD_AC[2] Power
VDD_AC[1]
88
50
18
Pad Ring Power (VDD_AC[2:0]). These pins
should be connected to a well decoupled +5 V
DC in common with VDD_DC[3:0]
VDD_AC[0]
VDD_DC[3] Power
VDD_DC[2]
116 DC Power (VDD_DC[3:0]). These pins should
86
52
20
be connected to a well decoupled +5 V DC in
common with VDD_AC[2:0].
VDD_DC[1]
VDD_DC[0]
VSS_AC[2] Ground
VSS_AC[1]
87
51
19
Pad Ring Ground (VSS_AC[2:0]). These pins
should be connected to GND in common with
VSS_DC[3:0].
VSS_AC[0]
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE
37