PM7344 S/UNI-MPH
DATA SHEET
PMC-950449
ISSUE 6
MULTI-PHY USER NETWORK INTERFACE
tolerance; the low frequency tolerance of the second algorithm is approximately
80% of that of the first algorithm. The T1 jitter tolerance with ALGSEL set to 1
and to 0 is shown in the following illustration.
Figure 6
- T1 Jitter Tolerance Specification
10
IN SPEC. REGION
CDRC MAX. TOLERANCE
(ALGSEL=0)
SINEWAVE
JITTER
AMPLITUDE
P. TO P. (UI)
LOG SCALE
CDRC MAX. TOLERANCE
(ALGSEL=1)
0.4
0.3
AT&T SPEC.
BELLCORE SPEC.
0.31
0.70
100
10
SINEWAVE JITTER FREQUENCY, kHz - LOG SCALE
The input jitter tolerance for E1 interfaces complies with ITU-T Recommendation
G.823. The tolerance is measured with a 215-1 sequence. The E1 jitter tolerance
is with ALGSEL set to 1 and to 0 is shown in the following illustrations.
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE
41