PM6341 E1XC
DATA SHEET
PMC-910419
ISSUE 8
E1 FRAMER/TRANSCEIVER
only be used if the receive analog function is desired and should then
connect to a common +5 V or ground rail, as appropriate, with the core, pad
ring, and transmit analog supply rails. There is no low impedance connection
within the PM6341 between the receive analog supply rail and other supply
rails. When the receive analog function is not desired, RAVD should be
connected to RAVS. Care must be taken to avoid coupling of noise into the
receive analog supply rails.
3. Inputs RSTB and ALE have integral pull-up resistors.
4. The TDLSIG/TDLINT pin has an integral pull-up resistor and defaults to being
an input after a reset.
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE
38
PMC [ PMC-SIERRA, INC ]
