PM5371TUDX
DATA SHEET
PMC-920525
ISSUE 6
SONET/SDH TRIBUTARY UNIT CROSS CONNECT
Register 04H: Parity Configuration
Bit
Type
Function
Default
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
TODDO
BODDO
LODDO
RODDO
TODDI
0
0
0
0
0
0
0
0
BODDI
LODDI
RODDI
This register is used to configure the parity polarity expected on input buses and
generated on output buses.
RODDI, LODDI, BODDI, TODDI:
These bits configure the parity expected on input buses. When high, odd
parity is expected. When low, even parity is expected. The RODDI bit
configures the SINR bus, the LODDI bit configures the SINL bus, the BODDI
bit configures the DINB bus, and the TODDI bit configures the DINT bus.
RODDO, LODDO, BODDO, TODDO:
These bits configure the parity generated on output buses. When high, odd
parity is generated. When low, even parity is generated. The RODDO bit
configures the DOUTR bus, the LODDO bit configures the DOUTL bus, the
BODDO bit configures the SOUTB bus, and the TODDO bit configures the
SOUTT bus. Note that bad parity can be introduced for diagnostic purposes
by manipulating these bits.
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE
35