欢迎访问ic37.com |
会员登录 免费注册
发布采购

PM5362-RI 参数 Datasheet PDF下载

PM5362-RI图片预览
型号: PM5362-RI
PDF下载: 下载PDF文件 查看货源
内容描述: SONET / SDH支路单元荷载处理器/性能监控 [SONET/SDH TRIBUTARY UNIT PAYLOAD PROCESSOR / PERFORMANCE MONITOR]
分类和应用: 监控监视器
文件页数/大小: 354 页 / 1028 K
品牌: PMC [ PMC-SIERRA, INC ]
 浏览型号PM5362-RI的Datasheet PDF文件第39页浏览型号PM5362-RI的Datasheet PDF文件第40页浏览型号PM5362-RI的Datasheet PDF文件第41页浏览型号PM5362-RI的Datasheet PDF文件第42页浏览型号PM5362-RI的Datasheet PDF文件第44页浏览型号PM5362-RI的Datasheet PDF文件第45页浏览型号PM5362-RI的Datasheet PDF文件第46页浏览型号PM5362-RI的Datasheet PDF文件第47页  
PM5362TUPP-PLUS  
DATA SHEET  
PMC-951010  
ISSUE 6  
SONET/SDH TRIBUTARY UNIT PAYLOAD PROCESSOR / PERFORMANCE MONITOR  
Pin Name Type  
Pin  
Function  
No.  
The active high outgoing payload active (OPL) signal  
identifies the bytes within the transport envelope frame on  
the OD[7:0] bus that carry the VC3 or VC4 virtual  
container(s), and the STS-1 synchronous payload  
envelopes.  
OPL  
Input  
132  
In outgoing byte interface mode (OBMODE set high), and  
floating mode is enabled, OPL must be set high to mark  
each payload byte. OD[7:0], OTPL, OTV5, AIS and IDLE  
contain valid data only for bytes in the VC3 or VC4 virtual  
container(s), or the STS-1 synchronous payload  
envelopes. Their contents should be ignored for bytes in  
the transport overhead as indicated by a low level on the  
OPL input. In locked mode, the outgoing virtual container  
(synchronous payload envelope) is locked with the J1 byte  
immediately following the C1 byte and OPL should be held  
low. During transport overhead byte locations on the  
outgoing stream, OTPL, OTV5, AIS and IDLE are set low.  
OD[7:0] is set to a valid pointer with offset of 522 and all-  
zeros for other transport overhead bytes. OPL is sampled  
on the rising edge of SCLK.  
In outgoing nibble interface mode (OBMODE set low), and  
floating mode is enabled, OPL must be set high to mark  
the more significant nibble of each payload byte. OPL is  
ignored during the less significant nibble. OD[3:0], OTPL,  
OTV5, AIS and IDLE contain valid data only for bytes in  
the VC3 or VC4 virtual container(s), or the STS-1  
synchronous payload envelopes. Their contents should be  
ignored for bytes in the transport overhead as indicated by  
a low level on the OPL input. In locked mode, the outgoing  
virtual container (synchronous payload envelope) is locked  
with the J1 byte immediately following the C1 byte and  
OPL should be held low. During transport overhead byte  
locations on the outgoing stream, OTPL, OTV5, AIS and  
IDLE are set low. OD[3:0] is set to a valid pointer with  
offset of 522 and all-zeros for other transport overhead  
bytes. OPL is ignored during the less significant nibble  
timeslots. OPL is sampled on the rising edge of NSCLK.  
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE  
23  
 复制成功!